Leten AV Vibrator / 2nd Generation Heated

☀️Summer Mega Sale 2026☀️

🌴Extra 15% OFF Everything*🌴

Leten AV Vibrator / 2nd Generation Heated

Product Specifications

Color: Gray
Accessories: Color box, blister pack, instruction manual, warranty card, charging cable, anti-counterfeiting label
Material: Silicone, ABS
Product Dimensions: 271.5*54.5*54.5mm
Packaging Dimensions: 290*58*110mm
Net Weight: 0.177kg
Modes: 7 intensity levels + 10 frequency levels
Power Supply: USB
Maximum Noise: ≤65db (variable speed)

Features and Selling Points

1.Multiple levels of powerful vibration, stimulating new textures, one-button heating, larger size, 360° swing, LED indicator;
2. Full and large 55mm vibrating head, thick and robust handle like holding a large penis, stronger contact and intense vibration from the large head;
3. More powerful vibration, vibration speed increased by one level to seven levels, significantly increasing the intensity of the vibration by 30%;
4. Hundreds of raised bumps in 6 rings, continuous heating at 39°, multi-purpose;
5. 360° head swing, 10 frequencies and 7 intensities, matte silicone textured material;
6. LED indicator, large capacity battery, low-decibel vibration, waterproof head.

Button Instructions and Usage

Power Button
1. Press and hold for 2 seconds to turn on/off. A single press will illuminate the indicator light for 2 seconds and then turn it off.
2. With the power on, a single press cycles through 7 vibration intensities.
Preheating Button
1. With the power off, press and hold for 2 seconds to turn the preheating function on/off.
2. If the power is not turned on within half an hour after preheating is activated, the preheating function will automatically turn off.
3. With the power on, a single press turns the preheating function on/off.
Vibration Frequency Switching Button
With the power on, a single press cycles through 10 vibration modes.

Charging and Usage Instructions: Connect the included magnetic cable to the charging port on the bottom of the product to charge.

1.Charge using a USB cable connected to a computer or power bank, or use a mobile phone USB charger in a wall socket.
2. The indicator light will flash red in a loop while charging; do not turn on the device.
3. Once fully charged, the indicator light will remain red for 5 minutes and then turn off. A full charge takes approximately 2 hours. Do not overcharge for extended periods.
4. The device cannot be turned on while charging. Please unplug the power cord after charging is complete before use.