LETEN Zero Gravity Chamber Masturbator / Black

☀️Summer Mega Sale 2026☀️

🌴Extra 15% OFF Everything*🌴

LETEN Zero Gravity Chamber Masturbator / Black

Product Parameters

Color: Black
Material: ABS, TPE, Silicone
Accessories: Packaging box, soft rubber cover, Type-C charging cable, warranty card, instruction manual, lubricant
Product Dimensions: 100*116*246mm
Packaging Dimensions: 140*125*350mm
Net Weight: 1.322kg
Modes: 10 modes, 6 speeds, 1 vibration mode
Charging Voltage: 5V
Charging Time: 4 hours
Discharge Time (Level 1, Speed 1): Over 40 minutes
Power Supply: Type-C charging
Maximum Noise: ≤70db
Target Audience: Individuals aged 18 and above

Features and Selling Points

1. Tactile Ecstasy: 1:1 true replica of the vulva, with a 140mm extended channel, providing triple pleasure through the vagina, breasts, and anus. Made of ultra-molecular flesh-like material, it's tender, thick, and tightly wrapped.
2. Visual Conquest: Panoramic sunroof design, allowing for visible insertion and removal. Ultra-penetrating infrared lamps with 7 built-in infrared heating strips and 168 LED heating beads provide continuous heating during use.
3. Innovative Magnetic Control Point Technology: 20-65mm piston stroke, allowing for adjustable depth and pleasure.
4. Auditory Quiet: Multiple noise reduction features, including brushless noise reduction technology, resulting in noise levels as low as 48dB. High speed and powerful thrust, with pistons reaching 550 times per minute.

Button Instructions and Usage

Power/Pause
1. Press and hold for 2 seconds to power on/off. Powering on defaults to Mode 1, Speed Level 1.
2. Tap to pause, then tap any key again to cancel pause.
+ Key/One-Click Burst:
1. Tap to accelerate, with 6 speed levels.
2. Press and hold for 2 seconds to activate the One-Click Burst function, reaching the fastest teleportation speed. Press any key (except the power button) to exit and return to Mode 1, Speed Level 1.
—Key/Pause: Tap to slow down.
Mode+: Tap upwards to switch between 10 telescopic modes; the first 3 are constant speed modes, and the last 7 are variable frequency modes.
Mode-: 1. Tap downwards to switch between telescopic modes.
2. With the machine off, tap this key; the inner cup will extend outwards for 30 seconds for easy installation of the soft rubber.
Heating:
1. Tap to turn heating on/off;
2. With the machine off, press and hold for 2 seconds to turn the preheating function on/off. It will automatically shut off after 20 minutes.
3. At room temperature, the maximum heating temperature is 42℃; a noticeable warmth can be felt after 10 minutes of continuous heating.

Warm Reminder: The product will automatically pause after 20 minutes of inactivity and automatically shut off after 15 minutes of pause. Press any key to exit while paused.

Charging Instructions

Charge using the included USB cable connected to the product's charging port.
1. Charge directly to a computer using the USB cable, or charge using a mobile phone USB charger in a wall socket;
2. Charging voltage: 5V, current: not exceeding 1.5A;
3. After fully charging, the indicator light will stay on for 5 minutes and then turn off. A full charge takes approximately 4 hours. Do not overcharge for extended periods;
4. The product cannot be used while charging. Please unplug the power cord after charging is complete before using it.

Indicator Lights

1.When the battery is low, the indicator light flashes 30 times and then automatically shuts down.
2. During charging, the indicator light flashes in a cycle; do not turn on the machine. Once fully charged, the indicator light will remain on for 5 minutes and then turn off.
3. When switching speeds (+/-), the indicator light will turn on/off sequentially.
4. When switching modes, the indicator lights will illuminate sequentially for the first three uniform speed modes; when switching to the last seven variable frequency modes, the indicator light will flash according to the extension/retraction frequency.
5. When pause is activated, the indicator light remains on; when preheating is activated, the red light remains on.

Cleaning and Installation of the Soft Rubber Cover

1.Remove the soft rubber cover and vibrator, and clean with water (do not open the soft rubber cover during cleaning, and do not use water hotter than 45℃ to avoid damaging the rubber).
2. Press the mode button to push the inner cup to the rim.
3. Insert the vibrator into the hole at the bottom of the soft rubber cover.
4. Replace the completely dried soft rubber cover into the inner cup, adjusting its position to ensure a perfect fit.
5. Push the inner cup back to the bottom with slight force and close the lid.

Warm Tip: Align the soft rubber cover with the magnetic point on the top of the product for installation.